Page 80 - ISCAR(TURNING-CATALOG-42-2022)

USER GUIDE
ISOTURN TOOLS JET HIGH-PRESSURE TOOLS • Each JHP tool is designed to work at a certain flow rate,

JHP tools provide advantageous performance,
High-Pressure Coolant
also when conventional pressure is applied.
Important Features
Pressure vs. Flow
• Up to 200% increased cutting speed when
machining titanium and heat resistant alloys.
• Effective chip control on problematic materials.
depending on the pressure. The flow rates are listed in
• Up to 100% increased tool life when machining
titanium, heat resistant alloys and alloy steel.
that the pump can supply the required flow in order to
achieve the optimal results. The pump data sheet will
usually list the maximum flow rate for each pressure range.
JHP tools are essential and important for the the catalog pages for each tool. The user should verify
aviation, aerospace and medical industries. Chips & Pressure
The coolant channels of the JHP tools feature • The coolant flow will start to break the chips at a
outlets very close to the cutting edges, thus certain pressure, depending on the specific tool and
gaining the following advantages: the workpiece material. If the chips are not breaking,
• Shorter machining time – cutting speed may the pressure should be increased until chip control
be increased by up to 200% when machining is achieved. As the pressure is increased, the chips
titanium and heat resistant alloys. become smaller and smaller. It is possible to control
• Longer tool life – increased tool life by up to the size of the chips by modifying the pressure.
100% not only on titanium and heat resistant
alloys, but also on stainless and alloy steels.
• Improved chip control – small chips can be obtained
even on the most ductile and problematic materials
• Effective cooling down of the cutting edge,
reducing sensitivity to heat fluctuations.
• Safer and more stable process.

78 ISCAR