Page 16 - ISCAR(HOLE_MAKING_CATALOG_65)

INDEXABLE DRILLS DCN C-8D DCN (1) DCN-DCXk7 DCONMS LU LU 0.620 OAL 35.0 LS 77.70 SSC (3) MIID (4)

Exchangeable Head Drills with
PL
Coolant Holes and a Cylindrical
Shank, Drilling Depth 8xD
DCONMSh6

OAL
(2)
LS
PL
DCX
Designation
6.00
DCN 040-032-06C-8D
32.62
4.40
4.00
4.0
ICP 040
DCN 045-036-06C-8D
4.50
6.00
ICP 045
35.0
4.5
0.660
36.66
82.20
4.90
DCN 050-040-06C-8D
5.40
86.30
5.0
ICP 050
35.0
6.00
40.73
0.730
5.00
44.81
0.810
DCN 055-044-06C-8D
6.00
5.5
ICP 055
35.0
90.70
5.50
5.90
• Do not mount smaller drilling heads other than the specified range of the drill body • For user guide and cutting conditions, see pages 68-81
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Seat size code
(4) Master insert identification
For inserts, see pages: ICP (18) • ICK (28) • ICM (36) • HCP-IQ (47) • FCP (52)

OAL
DCN C-12D LU LS
Exchangeable Head Drills with PL
Coolant Holes and a Cylindrical
Shank, Drilling Depth 12xD DCN-DCXk7 DCONMSh6
Designation DCN (1) DCX (2) DCONMS LU PL LS OAL SSC (3) MIID (4)
DCN 060-072-08C-12D 6.00 6.40 8.00 72.96 0.960 36.0 120.00 6.0 ICP 060 K DCN 6-9.99-Y
DCN 065-078-08C-12D 6.50 6.90 8.00 79.18 1.180 36.0 126.30 6.5 ICP 065 K DCN 6-9.99-Y
DCN 070-084-08C-12D 7.00 7.40 8.00 85.01 1.010 36.0 132.60 7.0 ICP 070 K DCN 6-9.99
DCN 075-090-08C-12D 7.50 7.90 8.00 91.10 1.100 36.0 136.60 7.0 ICP 075 K DCN 6-9.99
• Prior to using the 12xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a centering drill • The HCP or QCP drilling head may eliminate the need for a
pre-hole • Do not mount smaller drilling heads other than the specified range of the drill body • For user guide and cutting conditions, see pages 68-81
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Seat size code
(4) Master insert identification
For inserts, see pages: ICP (18) • ICP-2M (24) • ICK (28) • ICK-2M (32) • ICM (36) • ICN (42) • QCP-2M (43) • HCP-IQ (47) • FCP (52)

14 ISCAR