Page 395 - ISCAR(HOLE_MAKING_CATALOG_65)

LPR LPR
BT-FC-MB SS LB SS LB
MB Modular Boring System
with BT MAS-403 Face Contact DCONWS DCONWS BD
ADB Tapered Shanks ITS BORE
Fig. 1 Fig. 2 20°

Designation SS DCONWS LPR BD LB Fig. kg
BT30 FC MB50 30 50.00 60.00 - 32.0 1. 0.70
BT40 FC MB50 40 50.00 48.00 - 21.0 1. 0.90 HW 6.0
BT40 FC MB50X120 ADB 40 50.00 120.00 - 93.0 2. 1.90 HW 5.0
BT40 FC MB63 40 63.00 66.00 - - 1. 1.20 HW 8.0
BT50 FC MB50 50 50.00 66.00 - 28.0 1. 3.30 HW 6.0
BT50 FC MB50X120 ADB 50 50.00 120.00 60.00 82.0 2. 4.20 HW 6.0
BT50 FC MB63 50 63.00 75.00 - 37.0 1. 3.70 HW 8.0
BT50 FC MB63X150 ADB 50 63.00 150.00 70.00 112.0 2. 5.80 HW 8.0
BT50 FC MB80 50 80.00 75.00 - 37.0 1. 4.00 HW 8.0
BT50 FC MB80X180 ADB 50 80.00 180.00 - 142.0 2. 7.50 HW 8.0
(a)

BTB-MB SS
MB Modular Connection
System with BT MAS-403 CRKS DCONWS
Type B Taper Shanks
LB
LPR (a) Cutting edge position

Designation SS DCONWS LB LPR CRKS kg
BTB40 MB50 40 50.00 21.0 48.00 M16 0.96 HW 6.0
BTB40 MB63 40 63.00 - 66.00 M16 1.34 HW 8.0
BTB50 MB50X66 50 50.00 28.0 66.00 M24 3.89 HW 6.0
BTB50 MB63X75 50 63.00 37.0 75.00 M24 4.00 HW 8.0
BTB50 MB80 50 80.00 37.0 75.00 M24 4.30 HW 8.0
• Verify that the weight of the entire tool assembly does not exceed the machine spindle's carrying capability.

(a)
ISOM-MB SS
MB Modular Connection System
with DIN 2080-A Taper Shanks CRKS DCONWS

LB
LPR (a) Cutting edge position

Designation SS DCONWS LB LPR CRKS kg
ISOM 30-MB50 30 50.00 - 58.00 M12 0.78 HW 6.0
ISOM 40-MB50 40 50.00 36.0 48.00 M16 0.95 HW 6.0
ISOM 40-MB63 40 63.00 - 60.00 M16 1.34 HW 8.0
ISOM 45-MB50 45 50.00 33.0 48.00 M20 1.81 HW 6.0
ISOM 50-MB50 50 50.00 33.0 48.00 M24 2.82 HW 6.0
ISOM 50-MB63 50 63.00 41.0 56.00 M24 3.04 HW 8.0
ISOM 50-MB80 50 80.00 45.0 60.00 M24 3.60 HW 8.0
• Verify that the weight of the entire tool assembly does not exceed the machine spindle's carrying capability.

(a)
ISO-MB SS
MB Modular Connection System
with ISO 297 Taper Shanks CRKS DCONWS

LB
LPR (a) Cutting edge position

Designation SS DCONWS LB LPR CRKS kg
ISO 40-MB50 40 50.00 36.0 48.00 UNC 5/8"-11 1.03 HW 6.0
ISO 40-MB63 40 63.00 - 60.00 UNC 5/8"-11 1.36 HW 8.0
ISO 50-MB50 50 50.00 33.0 48.00 UNC 1.0"-8 2.83 HW 6.0
ISO 50-MB63 50 63.00 41.0 56.00 UNC 1.0"-8 2.94 HW 8.0
ISO 50-MB80 50 80.00 45.0 60.00 UNC 1.0"-8 3.56 HW 8.0
• Verify that the weight of the entire tool assembly does not exceed the machine spindle's carrying capability.

393