Page 416 - ISCAR(HOLE_MAKING_CATALOG_65)

ITS BORE BHD MB DCONMS ADJRGR LPR LOCK LOCK + + DCONWS IHFF (E) IHRF IHRF CH IHRF BW BHEH CW32 DCN-DCX Only for BHD PICCO ACE BH 40
LF (assembly)
IHWF E
2 µm
Bar Max
Fine Boring Heads with Digital
DCN-DCX
2 µm Direct Adjustment
SR44
DCONWS
MB50, MB63, MB80
Diametric Display
BBH
BATTERY
SR44
IHFF
IHAXF
Designation LF DCONMS DCN (1) DCX (2) LPR ADJRGR DCONWS RPMX (3) kg
BHD MB32-32-83 83.00 32.00 35.0 51.0 71.5 3.00 - 20000 0.41
BHD MB40-40-90 90.00 40.00 48.0 64.0 76.0 4.00 - 20000 0.73
BHD MB50-50-60 80.00 50.00 2.5 110.0 61.0 5.00 16.00 20000 1.10
BHD MB63-63-89 88.50 63.00 6.0 125.0 69.5 5.00 16.00 20000 2.20
BHD MB80-80-104 104.00 80.00 6.0 200.0 84.5 5.00 16.00 20000 3.90
• For spare parts, see pages 435-436 • Note that a protruding reset button dictates the enlargement of the actual DCONMS by 2 mm in each size respectively.
This is important when the tool is being used for back-boring applications where you must clear any obstacles inside the machine/workpiece.
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Maximum RPM
For tools, see pages: IHAXF (432) • IHAXF-AVI (434) • IHAXF-E (434) • IHFF (436) • IHRF (436) • IHRF-BW (439) • IHRF-CH (439) • IHWF (436)

414 ISCAR