Page 413 - ISCAR(HOLE_MAKING_CATALOG_65)

OAL
CR SOMT 86
Boring Cartridge with a Square
Insert for BHR MB50-50X100
Boring Head WF ITS BORE

Designation DCN (1) DCX (2) WF OAL MIID (3)
CR SOMT09 68-90-CP 68.00 90.00 23.60 54.00 SO.T 09...
• For user guide, see pages 403, 471-477
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Master insert identification
For inserts, see pages: SOGX/T-AL (115) • SOMT-DT (116) • SOMT-GF (115) • SOMT-HD (116)
For holders, see pages: BHR MB (404)

Spare Parts

Designation
CR SOMT SR 34-506 SW4-SD BLD T09/M7-SW4

LF (assembly)

BHC MB ADJRGR 10 µm 40
2 µm
Bar Max
Combi Rough and Fine Boring LOCK IHRF C
Heads with 10 µm Direct DCONMS 0.5 0.01 Non. 0.002 IHFF C DCN-DCX
Diameter Adjustment and IHSR C
2 µm by a Vernier Scale
ADJRGR

Designation DCONMS LF DCN (1) DCX (2) ADJRGR IH RPMX (3) kg
BHC MB25-25-57 25.00 56.50 28.0 36.0 0.50 IH...-C 10000 0.23
BHC MB32-32-71 32.00 71.00 36.0 46.0 0.50 IH...-C 10000 0.45
BHC MB40-40-90 40.00 90.00 46.0 60.0 1.00 IH...-C 8000 0.70
BHC MB50-50-87 50.00 87.00 60.0 75.0 1.00 IH...-C 8000 1.21
BHC MB63-63-109 63.00 109.00 75.0 95.0 2.00 IH...-C 6000 2.70
BHC MB80-80-130 80.00 130.00 95.0 120.0 2.00 IH...-C 5000 4.41
• The roughing head precedes the finishing head by 0.2 mm. Each head can be adjusted independently • Important: insert radius for combi rough and fine boring must be
the same size. • For spare parts, see page 468
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Maximum RPM
For tools, see pages: IHFF-C (413) • IHRF-C (413) • IHSR-C (413)
Graduated dial of 0.01 mm with
circular vernier of 0.002 mm

411