Page 466 - ISCAR(HOLE_MAKING_CATALOG_65)

ITS BORE PICCO R/L 090 a 20° 90° WF RE OHN LF DCONMS DMIN Right-hand shown

Inserts for Internal
Turning and Profiling

CDX

Dimensions
IC228
Designation DCONMS WF a LF OHN (1) RE CDX (2) DMIN
PICCO R/L 090.3-10 4.00 0.60 2.60 24.00 9.0 0.10 0.20 2.80 •
PICCO R/L 090.3-16 4.00 0.60 2.60 30.00 15.0 0.10 0.20 2.80 •
PICCO R/L 090.4-10 4.00 1.50 3.50 24.00 9.0 0.10 0.30 4.00 •
PICCO R/L 090.4-16 4.00 1.50 3.50 30.00 15.0 0.10 0.30 4.00 •
PICCO R/L 090.5-10 5.00 1.90 4.40 25.00 9.0 0.15 0.50 5.00 •
PICCO R/L 090.5-15 5.00 1.90 4.40 30.00 14.0 0.15 0.50 5.00 •
PICCO R/L 090.5-20 5.00 1.90 4.40 35.00 19.0 0.15 0.50 5.00 •
• Specify right- or left-hand bars
(1) Minimum overhang
(2) Cutting depth maximum

LF
PICCO R 050 (CBN) DCONMS
CBN Tipped Inserts for 5°
Internal Turning, Profiling and WF 8° OHN
Chamfering of Hard Steel
a
20° RE CDX
Right-hand shown • HARD MATERIALS
Dimensions

IB55
Designation DCONMS WF a LF OHN (1) CDX (2) DMIN RE
PICCO R 050.3-10B 4.00 0.60 2.60 25.50 10.0 0.20 2.80 0.10 •
PICCO R 050.4-10B 4.00 1.50 3.50 25.50 10.0 0.30 4.00 0.10 •
PICCO R 050.5-15B 5.00 1.90 4.40 31.50 15.0 0.50 5.00 0.15 •
PICCO R 050.6-15B 6.00 2.30 5.30 31.50 15.0 0.50 6.00 0.15 •
PICCO R 050.7-20B 7.00 2.80 6.30 36.50 20.0 0.60 6.80 0.15 •
• It is not recommended to use coolant when machining with CBN tipped tools • Available on request only
(1) Minimum overhang
(2) Cutting depth maximum

LF
PICCO R/LHD 050 DCONMS
Inserts for Internal Turning OHN
and Chamfering of Hard 8° DMIN
Steel - Up to 65 HRC a
WF 20° RE CDX

Dimensions
IC902
Designation DCONMS WF a LF OHN (1) RE CDX (2) DMIN
PICCO R/LHD 050.2-5 4.00 - 1.70 19.00 4.0 0.05 0.10 2.00 •
PICCO R/LHD 050.3-10 4.00 0.60 2.60 24.00 9.0 0.10 0.20 2.80 •
PICCO R/LHD 050.3-16 4.00 0.60 2.60 30.00 15.0 0.10 0.20 2.80 •
PICCO R/LHD 050.4-10 4.00 1.50 3.50 24.00 9.0 0.10 0.30 4.00 •
PICCO R/LHD 050.4-20 4.00 1.50 3.50 34.00 19.0 0.10 0.30 4.00 •
PICCO R/LHD 050.5-10 5.00 1.90 4.40 25.00 9.0 0.15 0.50 5.00 •
PICCO R/LHD 050.5-15 5.00 1.90 4.40 30.00 14.0 0.15 0.50 5.00 •
PICCO R/LHD 050.6-15 6.00 2.30 5.30 30.00 14.0 0.15 0.50 6.00 •
PICCO R/LHD 050.7-20 7.00 2.80 6.30 35.00 19.0 0.15 0.60 6.80 •
PICCO R/LHD 050.7-25 7.00 2.80 6.30 40.00 24.0 0.15 0.60 6.80 •
PICCO R/LHD 050.7-35 7.00 2.80 6.30 50.00 34.0 0.15 0.60 6.80 •
• Specify right- or left-hand bars
(1) Minimum overhang
(2) Cutting depth maximum

464 ISCAR