Page 133 - ISCAR(TURNING-CATALOG-42-2022)

USER GUIDE
ISOTURN INSERTS

NR Chipformer

3
Double-sided sharp cutting edge with a 13º positive rake angle
0.4
11˚ for machining high temperature alloys at ap < 6 mm.

R3M Chipformer
3° 17°
0.2
Double-sided insert for rough machining on stainless steel with a unique deflector
geometry to improve chip control. Includes a wavy surface to prevent chip hammering.

T3P Chipformer
10° 19°
0.3
Double-sided 6˚ negative flank trigone insert for high feed turning on steel.

TNM Chipformer

2.9 3.7
Double-sided trigon for roughing applications. Feed ranges:
8.5˚ from 0.25 to 0.65 mm/rev. Depth of cut from 2 to 7 mm.

EM-R Chipformer
1.55
0.28
Double-sided sharp cutting edge with a 13º positive rake angle
for machining high temperature alloys at ap < 6 mm.
13º
21º
HT/WG Chipformer

8˚
0.3
Double-sided for roughing applications. Feed range: 0.25 mm/rev to 0.8 mm/rev.
Depth of cut from 2.00 to 10.0 mm.
HM Chipformer
13˚
0.3
Feed range: 0.08 mm/rev to 0.75 mm/rev. Depth of cut from 1.5 mm to 8.0 mm.

H3P Chipformer
0.25
• For heavy roughing applications
• Low cutting force for low horse power machines
20°
• Excellent chip control due to changeable land and a flexible chip breaker
H4P Chipformer
0.3
• For heavy roughing applications
15° • For large depth of cut and high feed
• Strong cutting edge credit to a wide land and large land angle

H5P Chipformer
0.3
• For heavy roughing applications
• For large depth of cut and high feed
20° • Extremely strong cutting edge credit to a wide land and large land angle
• Suitable for high cutting conditions

131