Page 139 - ISCAR(TURNING-CATALOG-42-2022)

80°
WOMG-13-R3P-IQ L 95° 95°
Double-Sided 7° Negative
Side Flank Trigon Inserts for
Heavy Turning of Steel
RE
IC S

Dimensions Tough 1 Hard Recommended Machining Data ISOTURN INSERTS

IC8250 IC8150 ap f
Designation L IC S RE (mm) (mm/rev)
WOMG 130612-R3P-IQ 13.03 19.05 6.35 1.20 • • 3.50-8.00 0.30-0.80
WOMG 130616-R3P-IQ 13.03 19.05 6.35 1.60 • • 4.00-8.00 0.40-0.85
WOMG 130624-R3P-IQ 13.03 19.05 6.35 2.40 • • 4.00-8.00 0.40-1.00
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: C#-PWLOR/L-IQ (19) • PWLOR/L-IQ (18)

80°
L 95 º

WNGP-F2M
Double-Sided Trigon Inserts
for Super Finish Machining RE
Conditions on Stainless Steel IC S

Dimensions Recommended Machining Data

IC908 ap f
Designation L IC S RE (mm) (mm/rev)
WNGP 040302R/L-F2M 4.35 6.35 3.18 0.20 • 0.30-2.00 0.08-0.30
WNGP 040304R/L-F2M 4.35 6.35 3.18 0.40 • 0.30-2.00 0.08-0.30
WNGP 040308R/L-F2M 4.35 6.35 3.18 0.80 • 0.30-2.00 0.08-0.30
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/E-SWLNR/L-04 (103) • NQCH-SWLNR/L-S-JHP (8) • PWLNR/L-S (8)

80°
WNMG-F3M L 95° 95 º
Double-Sided Trigon 95°
Inserts for Stainless Steel
Finishing Applications
RE
IC S

Dimensions Tough 1 Hard Recommended Machining Data

IC830 IC6025 IC6015 IC806 IC807 ap f
Designation L IC S RE (mm) (mm/rev)
WNMG 060404-F3M 6.52 9.52 4.76 0.40 • • • • • 0.10-1.50 0.05-0.30
WNMG 060408-F3M 6.52 9.52 4.76 0.80 • • • • • 0.10-1.50 0.10-0.40
WNMG 060412-F3M 6.52 9.52 4.76 1.20 • • • • 0.20-2.50 0.15-0.50
WNMG 080404-F3M 8.70 12.70 4.76 0.40 • • • • • 0.10-1.50 0.05-0.30
WNMG 080408-F3M 8.70 12.70 4.76 0.80 • • • • • 0.10-1.50 0.10-0.40
WNMG 080412-F3M 8.70 12.70 4.76 1.20 • • • • • 0.20-2.50 0.15-0.50
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A-PWLNR/L-X/G (104) • A/S-MWLNR/L-W (103) • A/S-PWLNR/L (104) • C#-MULNR/L-MW (16) • C#-PWLNR/L-08-JHP (9)
• C#-PWLNR/L-X (13) • C#-PWLNR/L-X-JHP (14) • DWLNR/L (10) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16)
• HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • MWLNR/L-W (18) • PWLNR/L (8) • PWLNR/L-08-JHP (9) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12)
• PWLNR/L-X-JHP-MC (13) • S-DWLNR/L (99) • S-MULNR-MW (105) • DWLNR/L-JHP-MC (10)

137