Page 141 - ISCAR(TURNING-CATALOG-42-2022)

80°
WNMG-NF L 95° 95° 95 º
Double-Sided Trigon Inserts
for Semi-Finishing and
Finishing Applications
RE
IC S

Dimensions Tough 1 Hard Recommended ISOTURN INSERTS
Machining Data
IC8350 IC8250 IC908 IC30N IC530N IC8150 IC20N IC520N IC807 IC907 ap f
Designation L IC S RE IC10 IC20 (mm) (mm/rev)
WNMG 06T301-NF 6.52 9.52 3.97 0.10 • 0.20-1.00 0.05-0.15
WNMG 06T302-NF 6.52 9.52 3.97 0.20 • • • • • • • • • 0.30-1.50 0.08-0.17
WNMG 06T304-NF 6.52 9.52 3.97 0.40 • • • • • • • • • • • 0.40-2.50 0.07-0.25
WNMG 06T308-NF 6.52 9.52 3.97 0.80 • • • • • • 0.60-3.00 0.08-0.25
WNMG 060402-NF 6.52 9.52 4.76 0.20 • • 0.30-3.00 0.05-0.20
WNMG 060404-NF 6.52 9.52 4.76 0.40 • • • 0.60-3.00 0.08-0.25
WNMG 060408-NF 6.52 9.52 4.76 0.80 • 0.80-3.00 0.08-0.25
WNMG 080404-NF 8.70 12.70 4.76 0.40 • • • 0.40-3.50 0.07-0.25
WNMG 080408-NF 8.70 12.70 4.76 0.80 • • • 0.80-3.50 0.08-0.25
WNMG 080412-NF 8.70 12.70 4.76 1.20 • 1.20-3.50 0.08-0.25
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A-PWLNR/L-X/G (104) • A/S-MWLNR/L-W (103) • A/S-PWLNR/L (104) • C#-MULNR/L-MW (16) • C#-PWLNR/L-08-JHP (9)
• C#-PWLNR/L-X (13) • C#-PWLNR/L-X-JHP (14) • DWLNR/L (10) • E-PWLNR/L-HEAD (105) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16)
• HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • MWLNR/L-W (18) • PWLNR/L (8) • PWLNR/L-08-JHP (9) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12)
• PWLNR/L-X-JHP-MC (13) • S-DWLNR/L (99) • S-MULNR-MW (105) • DWLNR/L-JHP-MC (10)

80°
WNMG-VL L 95 º 95°
Double-Sided Trigon Inserts 95°
with a Chipformer for High
Temperature Alloys and
Stainless Steel Valves RE
IC S

Dimensions Tough 1 Hard Recommended Machining Data

IC908 IC806 IC907 ap f
Designation L IC S RE (mm) (mm/rev)
WNMG 06T308-VL 6.52 9.52 3.97 0.80 • 0.50-3.00 0.07-0.25
WNMG 080404-VL 8.70 12.70 4.76 0.40 • • 0.30-3.00 0.05-0.15
WNMG 080408-VL 8.70 12.70 4.76 0.80 • • 0.50-4.00 0.10-0.25
WNMG 080412-VL 8.70 12.70 4.76 1.20 • 1.00-4.50 0.12-0.25
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-MWLNR/L-W (103) • A/S-PWLNR/L (104) • C#-MULNR/L-MW (16) • C#-PWLNR/L-08-JHP (9) • DWLNR/L (10)
• E-PWLNR/L-HEAD (105) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15)
• MWLNR/L-W (18) • PWLNR/L (8) • PWLNR/L-08-JHP (9) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12) • S-DWLNR/L (99) • S-MULNR-MW (105)
• DWLNR/L-JHP-MC (10)
80°

WNMG-WG L 95 º 95° 95°
Double-Sided Trigon Wiper
Inserts for High Surface Finish
at High Feed Turning
RE
IC S

Recommended
Dimensions Tough 1 Hard
Machining Data
IC8250 IC530N IC8150 IC20N IC520N IC428 IC5005 IC807 IC907 ap f
Designation IC L S RE (mm) (mm/rev)
WNMG 06T304-WG 9.52 6.52 3.97 0.40 • • • • • 0.40-3.00 0.10-0.35
WNMG 06T308-WG 9.52 6.52 3.97 0.80 • • • • • 0.60-3.50 0.10-0.50
WNMG 060404-WG 9.52 6.52 4.76 0.40 • • • • 0.40-3.00 0.10-0.35
WNMG 060408-WG 9.52 6.52 4.76 0.80 • • • 0.60-3.50 0.10-0.50
WNMG 080408-WG 12.70 8.70 4.76 0.80 • • • • • • • • 1.00-3.50 0.10-0.50
WNMG 080412-WG 12.70 8.70 4.76 1.20 • • • • 1.20-4.00 0.30-0.80
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A-PWLNR/L-X/G (104) • A/S-MWLNR/L-W (103) • A/S-PWLNR/L (104) • C#-MULNR/L-MW (16) • C#-PWLNR/L-08-JHP (9)
• C#-PWLNR/L-X (13) • C#-PWLNR/L-X-JHP (14) • DWLNR/L (10) • E-PWLNR/L-HEAD (105) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16)
• HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • MWLNR/L-W (18) • PWLNR/L (8) • PWLNR/L-08-JHP (9) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12)
• PWLNR/L-X-JHP-MC (13) • S-DWLNR/L (99) • S-MULNR-MW (105) • DWLNR/L-JHP-MC (10)

139