Page 454 - ISCAR(HOLE_MAKING_CATALOG_65)

ITS BORE CCMT/CCGT-SM RE IC L 80° 7° D1 S 95 º 91° 99° 95 º 95 º
Single-Sided Turning Inserts for
Semi-Finish and Finishing on
Soft Materials and Exotic Alloys

Dimensions Tough 1 Hard Recommended
Machining Data

IC6025 IC8250 IC6015 IC8150 IC5010 IC428 IC5005 IC806 IC807 IC907 ap f
Designation L IC S RE D1 IC20 (mm) (mm/rev)
CCGT 060201-SM 6.45 6.35 2.38 0.10 2.80 • 0.25-2.00 0.05-0.20
CCGT 060202-SM 6.45 6.35 2.38 0.20 2.80 • 0.25-2.00 0.05-0.25
CCMT 060202-SM 6.45 6.35 2.38 0.20 2.80 • • • 0.25-2.00 0.05-0.25
CCMT 060204-SM 6.45 6.35 2.38 0.40 2.80 • • • • • • • 0.50-2.50 0.07-0.25
CCMT 060208-SM 6.45 6.35 2.38 0.80 2.80 • • • • 0.50-2.50 0.07-0.25
CCMT 09T302-SM 9.70 9.52 3.97 0.20 4.40 • • • • • • 0.50-2.50 0.06-0.25
CCMT 09T304-SM 9.70 9.52 3.97 0.40 4.40 • • • • • • • • • • 0.50-2.50 0.06-0.25
CCMT 09T308-SM 9.70 9.52 3.97 0.80 4.40 • • • • • • • • • 0.50-3.00 0.07-0.25
CCMT 120404-SM 12.90 12.70 4.76 0.40 5.50 • • • • • 0.70-3.50 0.07-0.25
CCMT 120408-SM 12.90 12.70 4.76 0.80 5.50 • • • • • • 0.70-3.50 0.07-0.30
For tools, see pages: IHCR (408) • IHRF (436) • IHRF-BW (439) • IHRF-C (413) • IHRF-CH (439) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)

80°
CCMT-PF 95 º
80° Rhombic Inserts with a
Positive Flank for Semi-Finish IC D1
and Finishing on Soft 7°
Materials and Exotic Alloys RE
L S

Recommended
Dimensions Tough 1 Hard
Machining Data

f
ap
Designation L IC S RE D1 IC830 IC6025 IC6015 IC806 IC807 IC907 IC804 (mm) (mm/rev)
CCMT 060202-PF 6.30 6.35 2.38 0.20 2.80 • • • • • • 0.20-2.50 0.04-0.25
CCMT 060204-PF 6.30 6.35 2.38 0.40 2.80 • • • • • • 0.40-2.50 0.04-0.30
CCMT 09T302-PF 9.70 9.52 3.97 0.20 4.40 • • • • • 0.50-3.00 0.05-0.30
CCMT 09T304-PF 9.70 9.52 3.97 0.40 4.40 • • • • • • • 0.50-3.50 0.05-0.35
For tools, see pages: IHCR (408) • IHRF (436) • IHRF-BW (439) • IHRF-C (413) • IHRF-CH (439) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)

452 ISCAR