Page 455 - ISCAR(HOLE_MAKING_CATALOG_65)

80° 99° 95 º
CCMT-14 95 º 91° 95 º
80° Rhombic Inserts with a
7° Positive Flank for Semi- IC D1
Finishing and Finish Turning ITS BORE
7°
RE
L S
Dimensions Tough 1 Hard Recommended
Machining Data

IC830 IC8250 IC428 IC5005 IC807 IC907 ap f
Designation L IC S RE D1 IC20 (mm) (mm/rev)
CCMT 060204-14 6.30 6.35 2.38 0.40 2.80 • • • • • • 0.50-2.50 0.14-0.25
CCMT 09T304-14 9.70 9.52 3.97 0.40 4.40 • • • 0.50-3.00 0.14-0.25
CCMT 09T308-14 9.70 9.52 3.97 0.80 4.40 • • • • • 0.80-3.00 0.14-0.30
CCMT 120408-14 12.90 12.70 4.76 0.80 5.50 • • 0.80-3.00 0.14-0.30
For tools, see pages: IHCR (408) • IHRF (436) • IHRF-BW (439) • IHRF-C (413) • IHRF-CH (439) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)

80° 95 º

CCET-WF 95 º 95 º
80° Rhombic Inserts with a 7° 86°
Positive Flank and a Wiper Near IC D1
the Corner for High Feed Finishing
RE 7°
0.3 RE
L S

Dimensions Recommended Machining Data

IC907 ap f
Designation L IC S RE D1 (mm) (mm/rev)
CCET 0602005-WF 6.30 6.35 2.38 0.05 2.80 • 0.05-2.00 0.01-0.20
CCET 09T3005-WF 9.50 9.52 3.97 0.05 4.40 • 0.05-2.00 0.01-0.20
For tools, see pages: IHCR (408) • IHRF (436) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)

80° 95 º 99°

CCMT/CCGT 95 º 95 º 91°
80° Rhombic Inserts with a
7° Positive Flank for Semi- IC D1
Finishing and Finish Turning
7°
RE
L S
Recommended
Dimensions Tough 1 Hard Machining Data

IC8250 IC30N IC20N IC520N ap f
Designation L IC S RE D1 IC20 (mm) (mm/rev)
CCGT 060202 6.45 6.35 2.38 0.20 2.80 • 0.50-2.00 0.10-0.20
CCGT 060202L (1) 6.45 6.35 2.38 0.20 2.80 • • 0.50-2.00 0.10-0.20
CCGT 060204 6.45 6.35 2.38 0.40 2.80 • 0.50-2.00 0.10-0.20
CCGT 060204L (1) 6.45 6.35 2.38 0.40 2.80 • 0.50-2.00 0.10-0.20
CCMT 060202 6.45 6.35 2.38 0.20 2.80 • • 0.50-2.00 0.10-0.20
CCMT 060204 6.45 6.35 2.38 0.40 2.80 • • • 0.50-2.00 0.12-0.22
CCMT 09T302 9.70 9.52 3.97 0.20 4.40 • • 0.50-2.50 0.12-0.25
CCMT 09T304 9.70 9.52 3.97 0.40 4.40 • • 0.50-2.50 0.12-0.25
CCMT 09T308 9.70 9.52 3.97 0.80 4.40 • • 0.80-3.00 0.14-0.25
• Use left-hand inserts for left-hand external tools and for right-hand internal tools
(1) Left-hand insert
For tools, see pages: IHCR (408) • IHRF (436) • IHRF-BW (439) • IHRF-C (413) • IHRF-CH (439) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)

453