Page 460 - ISCAR(HOLE_MAKING_CATALOG_65)

ITS BORE SCMT-19 90° 7° S D1 45 º 45 º 45° 75 º

Square Inserts with a 7° Positive
IC=L
Flank for Semi-Roughing at
Medium to High Feeds
RE

Dimensions Tough 1 Hard Recommended Machining Data

IC830 IC5005 IC807 IC907 ap fz
Designation L S RE D1 IC20 (mm) (mm/rev)
SCMT 120408-19 12.70 4.76 0.80 5.50 • • • • • 3.00-8.00 0.08-0.15
SCMT 120412-19 12.70 4.76 1.20 5.50 • 3.00-8.00 0.08-0.15
For tools, see page: IHPR (408)

RE 45 º

SCGT-AS 7° 75 º 45 º 45°
Square Inserts with a 7° Positive
Flank, Very Positive Rake D1
Angle and Sharp Cutting Edge
for Machining Aluminum 90˚ IC=L S

Dimensions Recommended Machining Data

ap f
Designation L IC S RE D1 IC20 (mm) (mm/rev)
SCGT 09T308-AS 9.52 9.52 3.97 0.80 4.40 • 0.50-3.00 0.10-0.30
SCGT 120404-AS 12.70 12.70 4.76 0.40 5.50 • 1.00-4.00 0.10-0.30
SCGT 120408-AS 12.70 12.70 4.76 0.80 5.50 • 1.00-4.00 0.10-0.30
For tools, see page: IHPR (408)

60°

TCMT-19 91 º 91 º 95 º
Triangular Inserts with a 7° 91 º
Positive Flat Rake for L
Semi-Roughing Applications D1
at Medium to High Feeds RE 7°
IC S

Recommended
Dimensions Tough 1 Hard Machining Data

IC830 IC50M IC8150 IC20 ap f
Designation L IC S RE D1 (mm) (mm/rev)
TCMT 110204-19 11.00 6.35 2.38 0.40 2.80 • • • 0.50-3.00 0.10-0.30
TCMT 16T308-19 16.50 9.52 3.97 0.80 4.40 • • • 1.00-4.00 0.20-0.35
TCMT 220508-19 22.00 12.70 5.00 0.80 5.50 • 1.00-4.00 0.20-0.35
For tools, see page: IHBR (409)

458 ISCAR