Page 457 - ISCAR(HOLE_MAKING_CATALOG_65)

95 º 99°
CCGT-AS 80˚ 7˚ 95 º 95 º 91°
80° Rhombic Inserts with a 7°
Positive Flank, Very Positive IC D1
Rake Angle and Sharp Cutting ITS BORE
Edge for Machining Aluminum RE
L S

Dimensions Recommended Machining Data

ap f
Designation L IC S RE D1 IC20 (mm) (mm/rev)
CCGT 060201-AS 6.40 6.35 2.38 0.10 2.80 • 0.50-2.00 0.10-0.20
CCGT 060202-AS 6.40 6.35 2.38 0.20 2.80 • 0.50-2.00 0.10-0.20
CCGT 060204-AS 6.40 6.35 2.38 0.40 2.80 • 0.50-2.00 0.10-0.25
CCGT 09T301-AS 9.70 9.52 3.97 0.10 4.40 • 0.50-2.50 0.10-0.25
CCGT 09T302-AS 9.70 9.52 3.97 0.20 4.40 • 0.50-2.50 0.10-0.25
CCGT 09T304-AS 9.70 9.52 3.97 0.40 4.40 • 0.50-2.50 0.10-0.25
CCGT 09T308-AS 9.70 9.52 3.97 0.80 4.40 • 0.80-3.00 0.10-0.30
CCGT 120402-AS 12.90 12.70 4.76 0.20 5.50 • 0.50-2.50 0.10-0.25
CCGT 120404-AS 12.90 12.70 4.76 0.40 5.50 • 0.50-2.50 0.10-0.25
CCGT 120408-AS 12.90 12.70 4.76 0.80 5.50 • 1.00-3.50 0.10-0.30
For tools, see pages: IHCR (408) • IHRF (436) • IHRF-BW (439) • IHRF-C (413) • IHRF-CH (439) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)

95 º 99°
CCGT-AF 80˚ 7˚ 95 º 95 º 91°
80° Rhombic Inserts with a 7°
Positive Flank, Very Positive IC D1
Rake Angle and Sharp Cutting
Edge for Machining Aluminum RE L S

Dimensions Recommended Machining Data

ap f
Designation L IC S RE D1 IC20 (mm) (mm/rev)
CCGT 09T308-AF 9.70 9.52 3.97 0.80 4.40 • 0.80-3.00 0.15-0.25
CCGT 120408-AF 12.90 12.70 4.76 0.80 5.50 • 1.00-3.50 0.15-0.30
For tools, see pages: IHCR (408) • IHRF (436) • IHSR (408) • IHSR-BW (410) • IHSR-C (413) • IHSR-CH (409)

455