Page 153 - ISCAR(TURNING-CATALOG-42-2022)

75° 95 º
CNMG-GN 80° 95 º 95 º
Double-Sided 80° Rhombic
Inserts for General Applications IC 75 º

RE L S

Dimensions Tough 1 Hard Recommended ISOTURN INSERTS
Machining Data
IC830 IC8350 IC6025 IC8250 IC6015 IC8150 IC20 IC5010 IC428 IC5005 IC807 IC907 ap f
Designation L IC S RE (mm) (mm/rev)
CNMG 120404-GN 12.90 12.70 4.76 0.40 • • • • • • 1.00-4.00 0.14-0.40
CNMG 120408-GN 12.90 12.70 4.76 0.80 • • • • • • • • • • • 1.00-4.50 0.16-0.45
CNMG 120412-GN 12.90 12.70 4.76 1.20 • • • • • • • • 1.50-5.00 0.22-0.50
CNMG 160612-GN 16.12 15.88 6.35 1.20 • • • • 2.00-7.00 0.22-0.60
CNMG 160616-GN 16.12 15.88 6.35 1.60 • 2.00-7.00 0.22-0.75
CNMG 190608-GN 19.30 19.05 6.35 0.80 • 1.50-8.00 0.20-0.70
CNMG 190612-GN 19.30 19.05 6.35 1.20 • • • • 2.00-7.98 0.25-0.70
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-PCLNR/L (101) • A/S-PCLNR/L-X/G (102) • C#-MULNR/L-MW (16) • C#-PCLNR/L-12-JHP (21) • C#-PCLNR/L-X (24)
• C#-PCLNR/L-X-JHP (24) • DCBNR/L (26) • DCLNR/L (25) • DCLNR/L-JHP-MC (25) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16)
• HSK A63WH-MUMNN-MW (17) • MCLNR/L (21) • MULNR/L-12MW (15) • PCBNR/L (22) • PCLNR/L (20) • PCLNR/L-12-JHP (21)
• PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23) • S-DCLNR/L (99) • S-MULNR-MW (105)

75° 95 º

CNMG-NR 80° 95 º 95 º
Double-Sided 80° Rhombic
Inserts with a Special Chipformer IC 75 º
for Heavy Machining

RE L S
Recommended
Dimensions Tough 1 Hard
Machining Data
IC830 IC8350 IC6025 IC8250 IC6015 IC8150 IC5010 IC428 IC5005 IC807 IC907 ap f
Designation L IC S RE (mm) (mm/rev)
CNMG 120408-NR 12.90 12.70 4.76 0.80 • • • • • • • • • • 1.00-5.00 0.15-0.50
CNMG 120412-NR 12.90 12.70 4.76 1.20 • • • • • • 1.00-5.00 0.23-0.55
CNMG 120416-NR 12.90 12.70 4.76 1.60 • 1.00-5.00 0.30-0.60
CNMG 160608-NR 16.12 15.88 6.35 0.80 • • 1.50-6.00 0.25-0.50
CNMG 160612-NR 16.12 15.88 6.35 1.20 • • • • 2.00-7.00 0.30-0.60
CNMG 160616-NR 16.12 15.88 6.35 1.60 • • • • • • • • 2.50-7.00 0.30-0.70
CNMG 190608-NR 19.30 19.05 6.35 0.80 • • 3.50-8.00 0.30-0.72
CNMG 190612-NR 19.30 19.05 6.35 1.20 • • • • 3.50-8.00 0.30-0.80
CNMG 190616-NR 19.30 19.05 6.35 1.60 • • • • • • 4.00-10.00 0.40-0.85
CNMG 190624-NR 19.30 19.05 6.35 2.40 • 4.00-10.00 0.40-1.20
CNMG 250924-NR 25.79 25.40 9.52 2.40 • 6.00-12.00 0.40-1.20
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-PCLNR/L (101) • C#-MULNR/L-MW (16) • C#-PCLNR/L-12-JHP (21) • C#-PCLNR/L-X (24) • C#-PCLNR/L-X-JHP (24)
• DCBNR/L (26) • DCLNR/L (25) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MCLNR/L (21)
• MULNR/L-12MW (15) • PCBNR/L (22) • PCLNR/L (20) • PCLNR/L-12-JHP (21) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23)
• S-DCLNR/L (99) • S-MULNR-MW (105) • A/S-PCLNR/L-X/G (102) • DCLNR/L-JHP-MC (25)

75° 95 º
CNMG-MR 80° 95 º 95 º
Double-Sided 80° Rhombic
Inserts for Rough Turning on IC 75 º
Stainless Steel and Soft Materials
RE L S

Dimensions Tough 1 Hard Recommended Machining Data
IC8350 IC8250 IC8150 IC807 ap f
Designation L IC S RE (mm) (mm/rev)
CNMG 160612-MR 16.12 15.88 6.35 1.20 • • • 2.00-10.00 0.30-0.90
CNMG 190612-MR 19.03 19.05 6.35 1.20 • • • • 2.00-10.00 0.30-0.90
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: C#-PCLNR/L-X (24) • DCBNR/L (26) • DCLNR/L (25) • MCLNR/L (21) • PCBNR/L (22) • PCLNR/L (20) • PCLNR/L-X (22) • A/S-PCLNR/L-X/G (102)

151