Page 232 - ISCAR(MILLINGCATALOG 38_2021)

FACE MILLS COOLANT SET L max CXT LB LB_2 THOD BD Key 1 Key Key 2 (2) (3)

Clamping Screws with
Adjustable Protrusion Nozzles
for Shell-Type Face Mills
min
BD
LB
Designation
(1)
6.00
COOLANT SET SR M10X1.5-22
21.00
2.0
17.0
7.00
M10
M4
18.00
COOLANT SET SRM12X1.75-27
2.0
6.00
22.00
31.00
17.0
M4
M12
7.00
27.00
35.00
COOLANT SET SR M16X2-32 28.00 THOD CXT 25.00 LB_2 L min L max Key Key 1 DRVS
30.00
13.00
10.00
M16
M8
26.00
37.00
25.0
3.0
42.00
COOLANT SET SR M20X2.5-40 52.00 M20 M8 45.00 30.00 3.0 25.0 13.00 10.00 36.00
(1) For the nut
(2) For the nozzle
(3) For the screw
Clamping Screws with
Adjustable Protrusion Nozzles for Shell-Type Face Mills
The protrusion of the nozzle screw can be easily The locking nut can be tightened by a standard
adjusted according to countersink depth, insert size open-ended wrench, or preferably by an offset ring
or any other application requirement. The nozzle wrench (ISO 10104, DIN 838 or DIN 897 standards).
screw position can be secured by a locking nut. If desired, the following ring wrenches
Tests show that cutting fluid supplied through can also be ordered from ISCAR:
the axis of a tool and directed radially at the • 7000783 Ring Wrench 10X13 mm for coolant set
bottom of the tool dramatically improves both SR M20X2.5-40 and Coolant set SR M16X2-32
the cooling effect and chip evacuation. • 7000788 Ring Wrench 6X7 mm for
The screws are offered as sets, comprising a nozzle coolant set SRM12X1.75-27 and
screw, locking screw, a locking nut and washers. coolant set SR M10X1.5-22.
Assembly with a Lock Nut
1 1 2 2 3 3 4 4 5 5 6 6 7 7
7103284 06/08
Assembly without a Lock Nut
1 1 2 2 3 3 4 4 5 5 6 6 7 7
Spare Parts
Designation
COOLANT SET SR M10X1.5-22 WASHER FLAT M4 DIN 433 SPRING PLUNGER
COOLANT SET SRM12X1.75-27 WASHER FLAT M4 DIN 433 SPRING PLUNGER
COOLANT SET SR M16X2-32 WASHER M8 DIN 433 A4 NOZZLE M8 NUT M8 DIN 934 A2
COOLANT SET SR M20X2.5-40 WASHER M8 DIN 433 A4 NOZZLE M8 NUT M8 DIN 934 A2

230 ISCAR