Page 88 - ISCAR(MILLINGCATALOG 38_2021)

RE5.0
ENDMILLS • SOLID CARBIDE • MULTI-MASTER

MM S-A-C# DCONMS THSZWS BD
MULTI-MASTER Threaded
Connection Shanks with LU
a CAMFIX (ISO 26623-1) LPR LBX
Exchangeable Adaptation

Designation DCONMS THSZWS BD LPR LBX LU CDI (1) kg
MM S-A-H035-C3-T05 32.00 T05 7.60 35.00 20.0 15.00 0 0.00
MM S-A-H035-C3-T06 32.00 T06 9.25 35.00 20.0 15.00 0 0.12
MM S-A-H040-C3-T08 32.00 T08 11.60 40.00 25.0 20.00 0 0.13
MM S-A-H040-C3-T10 32.00 T10 15.30 40.00 25.0 20.00 0 0.15
MM S-A-H045-C3-T12 32.00 T12 18.30 45.00 30.0 25.00 0 0.16
MM S-A-H045-C4-T06 40.00 T06 9.25 45.00 25.0 20.00 0 0.00
MM S-A-H045-C4-T08 40.00 T08 11.60 45.00 25.0 20.00 0 0.00
MM S-A-H050-C4-T10 40.00 T10 15.30 50.00 30.0 25.00 0 0.00
MM S-A-H055-C4-T12 40.00 T12 18.30 55.00 35.0 30.00 0 0.00
MM S-A-H055-C4-T15 40.00 T15 23.90 55.00 35.0 30.00 0 0.35
MM S-A-H060-C5-T10 50.00 T10 15.30 60.00 40.0 35.00 0 0.00
MM S-A-H060-C5-T12 50.00 T12 18.30 60.00 40.0 35.00 0 0.48
MM S-A-H060-C5-T15 50.00 T15 23.90 60.00 40.0 35.00 0 0.58
MM S-A-H065-C6-T12 63.00 T12 18.30 65.00 43.0 38.00 0 0.00
MM S-A-H065-C6-T15 63.00 T15 23.90 65.00 43.0 38.00 0 0.00
MM S-A-H070-C8-T15 80.00 T15 23.90 70.00 40.0 35.00 0 0.00
• Do not apply lubricant to the threaded connection • For adaptation options, see page 44
(1) 1 - Hole for data chip, 0 - Without hole for data chip

MM TS-A Detail B THSZWS MM TS-A-L...-H
Cylindrical Shanks Carrying BD
Interchangeable Milling Heads BD DCONMS
30˚ B OAL

Designation THSZWS DCONMS BD OAL Shank m. (1) RPMX (2) CSP (3) kg
MM TS-A-L070-C08-T04 T04 8.00 5.80 70.00 S - 0 0.00
MM TS-A-L070-C08-T05 T05 8.00 7.60 70.00 S 60000 0 0.03
MM TS-A-L080-C10-T06 T06 10.00 9.60 80.00 S 47400 0 0.05
MM TS-A-L080-C10-T06-H T06 10.00 9.60 80.00 S 46920 1 0.04
MM TS-A-L090-C12-T08 T08 12.00 11.60 90.00 S 43110 0 0.08
MM TS-A-L090-C12-T08-H T08 12.00 11.60 90.00 S 42780 1 0.08
MM TS-A-L100-C16-T10 T10 16.00 15.30 100.00 S 39420 0 0.16
MM TS-A-L100-C16-T10-H T10 16.00 15.30 100.00 S 39210 1 0.14
• Do not apply lubricant to the threaded connection
(1) S-steel, C-carbide
(2) The actual maximum RPM should be calculated by dividing the listed RPM max by the number of the head's flutes being used.
(3) 0 - Without coolant supply, 1 - With coolant supply

MM GRT (shanks) THSZWS MM GRT-...C-T08
Solid Carbide Cylindrical Shanks
Carrying Slitting and Grooving DCONMS
Interchangeable Milling Heads
OAL/LF

Designation THSZWS DCONMS OAL Shank m. (1) CSP (2) kg
MM GRT-095-T06 T06 9.52 80.00 C 0 0.07
MM GRT-100-T06 T06 10.00 100.00 C 0 0.10
MM GRT-120C-T08 T08 12.00 100.00 C 1 0.12
MM GRT-127C-T08 T08 12.70 120.00 C 1 0.17
• MM GRT... shanks serve mainly for MM GRIT... slitting heads. When mounting other types of milling heads, do not exceed maximum specified depth of cut for the particular
milling head. Since the shank diameter is not relieved, it may touch a wall on the workpiece being machined.
• Use carbide shanks for groove milling heads and for applications requiring high rigidity and precision.
(1) C - Solid carbide
(2) 0 - Without coolant supply, 1 - With coolant supply

86 ISCAR