Page 636 - ISCAR(TURNING-CATALOG-42-2022)

EXCHANGEABLE HEADS HOLDERS
CDX
IM-GHAD-8
Holders with an ISO 26622-1(*) DAXN-DAXX
Tapered Shank for Grooving, WF DCONMS
Turning and Facing Adapters CW CDX LF CDX - See specific adapter dimensions
Designation DCONMS CW LF WF DAXN (1) DAXX (2) CDX (3) CDI (4)
IM50 GHAD-8 50.00 8.00 60.00 26.00 80.0 510.0 25.00 0
IM63 GHAD-8 63.00 8.00 65.00 32.50 80.0 510.0 25.00 0
• (*) Tools with orientation holes in the flange groove can be supplied on request
(1) Minimum axial grooving diameter
(2) Maximum axial grooving diameter
(3) Cutting depth maximum
(4) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: GADR/L-8 (269) • GAFG-R/L-8 (562) • PCADR/L 34N-RE (301)

Spare Parts
Designation
IM-GHAD-8 SR 14-519 T-20/5 SR M6X25 DIN912 HW 5.0 SR 76-1022 EZA 125 EZ 125

LPR

CDX DCONMS
IM-HAD
Holders with an ISO 26622-1(*) WF
Tapered Shank for Internal
Facing Adapters
26 CDX - See specific adapter dimensions

Designation DCONMS LPR WF CDI (1)
IM40 HAD 40.00 60.00 18.0 0 SR 14-519 T-20/3 HW 3.0 SR M4X6DIN912
IM50 HAD 50.00 60.00 18.0 0 SR 14-519 T-20/3 HW 3.0 SR M4X6DIN912
• (*) Tools with orientation holes in the flange groove can be supplied on request
(1) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: HFAER/L-4 (551) • HFAER/L-5T, 6T (552) • HFAIR/L-4 (554) • HFAIR/L-DG (555) • HGAER/L-3 (551) • HGAIR/L-3 (554)

8 DCONMS
IM-HAPR/L
Perpendicular Holders with an
ISO 26622-1 (*) Tapered Shank LF
for Internal Facing Adapters CDX CDX - See specific adapter dimensions
• Right-hand shown

Designation DCONMS LF CDI (1)
IM40 HAPR/L 40.00 50.00 0 SR 14-519 T-20/3
IM50 HAPR 50.00 50.00 0 SR 14-519 T-20/3
• (*) Tools with orientation holes in the flange groove can be supplied on request
(1) 1 - Hole for data chip, 0 - Without hole for data chip
For tools, see pages: HFAER/L-4 (551) • HFAER/L-5T, 6T (552) • HFAIR/L-4 (554) • HFAIR/L-DG (555) • HGAER/L-3 (551) • HGAIR/L-3 (554)

634 ISCAR