Page 387 - ISCAR(MILLINGCATALOG 38_2021)
P. 387
HSM90S EAL-14
Long Reach Endmills Carrying DC DCONMS Rd°
HSM90S APCR 1405... Inserts
for Machining Aluminum
APMX
LH
OAL
Designation DC APMX (1) CICT (2) LH OAL DCONMS RPMX (3) RMPX° (4) kg
HSM90S EAL-D32-2-C32-14 32.00 13.50 2 80.0 200.00 32.00 37500 10.0 1.02 SR M5X0.8IP20-1S BLD IP20/M7 SW6-T-SH
• Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screw
• Insert tightening torque: 6 (Nxm) CUTTERS FOR ALUMINUM
(1) D.O.C. changes according to insert radius. APMX 13.5 is the value for HSM90S APCR 140550R-P insert
For inserts with a corner radius larger than
5.0 mm, the corner of the pocket must
be modified according to the drawing.
R body= R insert +0.5 mm
DHUB
DCONMS
HSM90S FAL-14
90° Face Mills Carrying Super Rd°
Positive and Polished Rake OAL
Inserts for Machining Aluminum
at High Rotation Speeds APMX
DC
Designation DC CICT (1) APMX (2) OAL DHUB DCONMS Arbor (3) RMPX° (4) RPMX (5) kg
HSM90S FAL-D050-2-22-14 50.00 2 13.50 57.00 47.00 22.00 A 8.0 38000 0.43
HSM90S FAL-D050-3-22-14 50.00 3 13.50 57.00 47.00 22.00 A 8.0 38000 0.42
HSM90S FAL-D050-4-22-14 50.00 4 13.50 57.00 47.00 22.00 A 7.0 33000 0.43
• Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screw
• Insert tightening torque: 6 (Nxm)
(1) Number of inserts
For inserts with a corner radius larger than
5.0 mm, the corner of the pocket must
be modified according to the drawing.
R body= R insert +0.5 mm
Spare Parts
Designation
HSM90S FAL-14 SR M5X0.8IP20-1 BLD IP20/M7 SW6-T-SH SR M10X40DIN912
385