Page 488 - ISCAR(MILLINGCATALOG 38_2021)

MILLING INSERTS LNKX/LNMT 1506PNTN/ Dimensions S L RE W1 APMX Tough 1 Hard RE Machining Data
LNMT

PN-N MM
10° Ref.
Tangentially Clamped Inserts
with a Reinforced Negative Land
for Unfavorable Conditions
Recommended

fz
ap
S
(mm)
RE
W1
L
Designation
(mm/t)
LNKX 1506PN-N MM
7.00
15.00
6.00
13.88
LNKX 1506PNTN
0.80
2.00-7.00
0.10-0.20
7.00
•
13.88
2.00-7.00
15.00
6.00
0.10-0.20
LNKX 150612-PNTN 6.00 15.00 13.88 0.80 APMX (1) • IC328 • IC928 • IC5400 • IC908 • IC810 • IC910 DT7150 • IC4100 2.00-7.00 0.10-0.20
7.00
1.20
LNMT 1506PN-N MM 6.00 15.00 13.95 0.80 7.00 • • • 2.00-7.00 0.10-0.20
LNMT 1506PNTN 6.00 15.00 13.95 0.80 7.00 • • • 2.00-7.00 0.10-0.20
LNMT 150616PN-N MM 6.00 15.00 13.95 1.60 7.00 • 2.00-7.00 0.10-0.20
• For cutting speed recommendations, see pages 542-547
(1) D.O.C. when the insert is on the cutter.
For tools, see pages: F90LN-N15 (208) • FDN-CALN15 (351) • SDN-CALN15 (361) • SSB-LN15-R/L (362)
LNKX PNTN LNMT PNTN LNKX/LNMT PN-N-MM
An economical
class insert

LNMW 1506 PNTN S W1
Tangentially Clamped 10° Ref.
Insert for Machining Grey L
and Nodular Cast Iron APMX
RE
RE
Dimensions Recommended Machining Data
ap
fz
Designation W1 L S RE APMX (1) IC910 (mm) (mm/t)
LNMW 1506 PNTN 6.00 15.00 13.98 0.80 7.00 • 2.00-7.00 0.20-0.30
• Flat rake, used for grey cast iron e.g. GG25 170-240 HBR • For cutting speed recommendations, see pages 542-547
(1) DOC when the insert is on the cutter.
For tools, see pages: F90LN-N15 (208) • FDN-CALN15 (351) • SDN-CALN15 (361) • SSB-LN15-R/L (362)

LNKX 1506PN-N PL S W1
Tangentially Clamped Inserts with
a Positive Land for Alloyed and L
Stainless Steel and Cast Iron APMX
RE

Recommended
Dimensions Tough 1 Hard
Machining Data

IC328 IC928 IC908 IC910 DT7150 ap fz
Designation W1 L S RE APMX (1) (mm) (mm/t)
LNKX 1506PN-N PL 6.00 15.00 13.88 0.80 7.00 • • • • • 2.00-7.00 0.10-0.15
• Positive land (PL), leaves sharp edges without chipping on cast iron components • High shear rake for steel and stainless steel • For cutting speed recommendations, see
pages 542-547
(1) D.O.C. when the insert is on the cutter.
For tools, see pages: F90LN-N15 (208) • FDN-CALN15 (351) • SDN-CALN15 (361) • SSB-LN15-R/L (362)

486 ISCAR