Page 614 - ISCAR(TURNING-CATALOG-42-2022)
P. 614
USER GUIDE
FACE GROOVING Face Grooving and Turning Recommendations Recommended feed range in grooving with HFPR/L
Using Adapters for 4-6 mm Inserts
Using Adapters for 3 mm Inserts
Recommended feed range for grooving with Grip 3...
and HGPL 3... inserts and HGAIR/L and HGAER/L
inserts and HFAIR/L & HFAER/L adapters.
adapters. Feed range changes according to adapter type.
0.12
mm/rev
0.11
0.08
0.10
0.07
0.07 0.08 0.08 Feed mm/rev 0.10 0.12
0.09
Feed 0.06 0.08
0.05
0.05 0.07 0.07
0.04 0.06
0.04 0.05 0.05
0.05
0.03 0.04
0.04
0.02 0.02 0.02 0.02 0.02 0.02
4 5 6 mm
40-60 40-60 40-80 40-80 40-80 m/min Width of Inserts (W)
Cutting Speed Vc
Recommended depth of cut and feed range in turning
HGAIR/L 12-3T6 with HFPR/L inserts and HFAIR/L & HFAER/L adapters.
HGAER/L 12-3T6
Feed range changes according to adapter type.
HGAIR/L 14-3T7
HGAER/L 14-3T7 mm
2.5
HGAIR/L 17-3T8
HGAER/L 17-3T8
2.0
HGAIR/L 21-3T9
HGAER/L 21-3T9 1.5
Depth of Cut ap 1.0
HGAIR/L 25-3T9
Recommended depth of cut and feed range for turning 0.5
with HGPL 3... inserts with HGAIR/L and HGAER/L
adapters. Feed range changes according to adapter type.
0.05 0.1 0.15 0.2 0.25 mm/rev
mm Feed
1.2
HFAIR/L- ...4
Depth of Cut ap 0.8 HFAIR/L- ...5
1.0
HFAER/L- ...4
HFAER/L- ...5
0.6
HFAIR/L- ...6
HFAER/L- ...6
0.4 Note: In roughing, reduce feed when depth of cut is increased, ad increase
feed at small depth of cut.
0.2
0.04 0.05 0.06 0.07 0.08 0.09 0.1 0.11 0.12 mm/rev
Feed
HGAIR/L 21-3T9
HGAER/L 21-3T9
HGAIR/L 25-3T9
HGAIR/L 14-3T7
HGAER/L 14-3T7
HGAIR/L 17-3T8
HGAER/L 17-3T8
HGAIR/L 12-3T6
HGAER/L 12-3T6
Note: In roughing, increase feed at small depth of cut, and reduce feed at
large depth of cut.
612 ISCAR