Page 223 - ISCAR(TURNING-CATALOG-42-2022)
P. 223
RCGX-Ceramic 7° BN
Round Ceramic Inserts for IC 120° GB
Machining Nickel Based
Alloys and Hardened Steel
S
Dimensions Tough 1 Hard Recommended Machining Data ISOTURN INSERTS
f
ap
Designation IC S GB BN IW7 IS35 IS25 IN23 (mm) (mm/rev)
RCGX 090700E 9.52 7.94 25.0 0.20 • • • 0.10-3.00 0.07-0.50
RCGX 090700T 9.52 7.94 25.0 0.20 • • • • 0.10-3.00 0.07-0.50
RCGX 090700TE 9.52 7.94 25.0 0.20 • 0.10-3.00 0.07-0.50
RCGX 120700E 12.70 7.94 25.0 0.20 • • • 0.10-4.00 0.07-0.50
RCGX 120700T 12.70 7.94 25.0 0.20 • • 0.10-4.00 0.07-0.50
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
RPGX-Ceramic 11°
Round Ceramic Inserts for
Machining Nickel Based IC 120°
Alloys and Hardened Steel
S
Dimensions Tough 1 Hard Recommended Machining Data
ap f
Designation IC S IW7 IS35 IS25 (mm) (mm/rev)
RPGX 090700E 9.52 7.94 • • 0.50-3.00 0.10-0.45
RPGX 090700T 9.52 7.94 • • • 0.50-3.00 0.10-0.45
RPGX 120700E 12.70 7.94 • • 0.50-4.50 0.10-0.45
RPGX 120700T 12.70 7.94 • • • 0.50-4.50 0.10-0.45
• Tools can be supplied on request. • For user guide and cutting speed recommendations, see pages 122-134, 236-248
80° 10° 95 º
CNMA (PCD) RE LE L 95 º 95 º
80° Rhombic Inserts with a Single 5°
PCD Top Corner Tip and Positive
Rake for Finishing Applications
IC S
Dimensions Recommended Machining Data
ap f
Designation L IC S RE LE ID5 (mm) (mm/rev)
CNMA 120404D 12.90 12.70 4.76 0.40 3.9 • 0.10-3.00 0.05-0.26
CNMA 120408D 12.90 12.70 4.76 0.80 3.6 • 0.10-3.00 0.05-0.26
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-PCLNR/L (101) • C#-MULNR/L-MW (16) • C#-PCLNR/L-12-JHP (21) • C#-PCLNR/L-X (24) • C#-PCLNR/L-X-JHP (24)
• DCLNR/L (25) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • PCLNR/L (20)
• PCLNR/L-12-JHP (21) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23) • S-DCLNR/L (99) • S-MULNR-MW (105) • A/S-PCLNR/L-X/G (102)
• DCLNR/L-JHP-MC (25)
221