Page 211 - ISCAR(TURNING-CATALOG-42-2022)

45 º
SC45MT-SM 90° 45º 45 º
Single-Sided Square Inserts
for Finishing Applications IC=L D1
(CHAMELEON Multifunction
Pocket System)
RE
S
Dimensions Tough 1 Hard Recommended Machining Data ISOTURN INSERTS

IC830 IC8250 IC8150 ap f
Designation L S RE D1 (mm) (mm/rev)
SC45MT 100508-SM 9.53 5.00 0.80 4.50 • • • 0.50-3.00 0.10-0.30
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: S-SUXCR/L-CM (110) • SUXCR/L-CM (54)

Inserts for Machining Aluminum

80°
L 95° 95° 95 º

WNGG-F3N
Double-Sided Sharp-Edged
Positive and Polished Rake Inserts RE
for Finishing on Aluminum and IC S
Other Non-Ferrous Materials
Dimensions Recommended Machining Data

ap f
Designation L IC S RE IC20 (mm) (mm/rev)
WNGG 060402-F3N-P 6.52 9.52 4.76 0.20 • 0.20-3.00 0.10-0.30
WNGG 060404-F3N-P 6.52 9.52 4.76 0.40 • 0.40-3.00 0.12-0.35
WNGG 060408-F3N-P 6.52 9.52 4.76 0.80 • 0.80-3.00 0.15-0.40
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A-PWLNR/L-X/G (104) • A/S-MWLNR/L-W (103) • DWLNR/L (10) • MWLNR/L-W (18) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12)
• PWLNR/L-X-JHP-MC (13)
80° 95 º

95 º 95 º

CNGG-F3N IC
Double-Sided Sharp-Edged
Positive and Polished Rake Inserts
for Finishing on Aluminum and RE L S
Other Non-Ferrous Materials

Dimensions Recommended Machining Data
ap f
Designation L IC S RE IC20 (mm) (mm/rev)
CNGG 090402-F3N-P 9.70 9.52 4.76 0.20 • 0.30-3.00 0.10-0.30
CNGG 090404-F3N-P 9.70 9.52 4.76 0.40 • 0.40-3.00 0.10-0.30
CNGG 090408-F3N-P 9.70 9.52 4.76 0.80 • 0.80-3.00 0.10-0.30
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-PCLNR/L-X/G (102) • C#-PCLNR/L-X-JHP (24) • DCLNR/L (25) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23)
• AVC-PCLNR/L (96)
A-A 95 º

CNGX-M3N IC A S 95 º 95 º
Double-Sided Positive
Rake Inserts with High
Helical and Sharp Edge
for Medium Machining on
Non-Ferrous Materials RE A L

Dimensions Recommended Machining Data

ap f
Designation L IC S RE IC20 (mm) (mm/rev)
CNGX 090604-M3N-P 9.70 9.52 4.40 0.40 • 0.40-3.00 0.10-0.30
CNGX 090608-M3N-P 9.70 9.52 4.40 0.80 • 0.80-3.00 0.10-0.30
• PCLNR/L...X and A..-PCLNR/L-X are most recommended as they were designed especially for this insert
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-PCLNR/L-X/G (102) • C#-PCLNR/L-X-JHP (24) • DCLNR/L (25) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23)
209