Page 416 - ISCAR(TURNING-CATALOG-42-2022)

BDRED OAH H CND
TOOLS FOR MINIATURE PARTS
MG
Internal Grooving, Turning
and Threading Bars DMIN OAL
WF LDRED
DCONMS
CDX CDX DF
CWN-CWX

Designation DCONMS DMIN (1) CDX (2) BDRED OAL LDRED WF (3) H CWN (4) CWX (5) OAH DF CND Insert
MG 12-08C16 12.00 8.00 1.50 6.00 92.00 16.0 4.80 11.0 0.50 3.00 16.3 18.00 6.0 GIQR/L 8 SR 76-1499 T-8/5
MG 12-08C23 12.00 8.00 1.50 6.00 92.00 23.0 4.80 11.0 0.50 3.00 16.3 18.00 6.0 GIQR/L 8 SR 76-1499 T-8/5
MG 12-11C25 12.00 11.00 2.30 8.00 92.50 25.0 6.70 11.0 0.50 3.00 16.3 18.00 6.0 GIQR/L 11 SR M3.5-08134 T-9/5
• The same tool applies on right and left machining
(1) Check according to specific insert data
(2) Check according to specific insert data
(3) Cutting edge radius on rotating tool
(4) Minimum cutting width
(5) Maximum cutting width
For inserts, see pages: GIQR/L 8 (415) • GIQR/L 8-R (415) • GIQR/L 11 (416) • GIQR/L 11-R (416) • GIQR/L 11-15 (417) • GIQR/L 11-15-R (417)
• GIQR/L-A18 (417) • GIQR/L-B18 (418) • GIQR/L-MT (418) • GIQR/L-WT (418)

MGCH...C OHN-OHX

MGCH
Solid Carbide Bars for Internal DCONMS
Grooving, Turning and OAL=LF MG PCO...
Threading, DMIN 8 mm DMIN
WF
CDX CDX
CWN-CWX

Designation DMIN (1) CDX (2) DCONMS OAL OHN (3) OHX (4) WF CWN (5) CWX (6) CSP (7) Insert
MGCH 06 8.00 1.50 6.00 62.00 16.0 42.0 4.80 0.50 4.00 0 GIQR/L 8 SR 76-1499 T-8/5
MGCH 06C 8.00 1.50 6.00 62.00 16.0 42.0 4.80 0.50 4.00 1 GIQR/L 8 SR 76-1499 T-8/5
MGCH 06-L100 8.00 1.50 6.00 100.00 16.0 80.0 4.80 0.50 4.00 0 GIQR/L 8 SR 76-1499 T-8/5
MGCH 08 - (8) - (9) 8.00 76.00 20.0 56.0 - (10) 0.50 5.00 0 GIQR/L 11/11-15 SR M3.5-08134 T-9/5
MGCH 08C - - 8.00 76.00 20.0 56.0 - 0.50 5.00 1 GIQR/L 11/11-15 SR M3.5-08134 T-9/5
(8)
(9)
(10)
MGCH 08-L125 - - 8.00 125.00 70.0 105.0 - 0.50 5.00 0 GIQR/L 11/11-15 SR M3.5-08134 T-9/5
(8)
(9)
(10)
• The same tool applies on right and left machining .
(1) Check according to specific insert data
(2) Check according to specific insert data
(3) Minimum overhang
(4) Maximum overhang
(5) Minimum cutting width
(6) Maximum cutting width
(7) 0 - Without coolant supply, 1 - With coolant supply
(8) DMIN=11 mm for GIQR 11, DMIN=15 mm for GIQR 11-15
(9) CDX=2.30 for GIQR 11, CDX=6.3 for GIQR 11-15
(10) WF=6.70 mm for GIQR 11, WF=10.6 mm for GIQR 11-15
For inserts, see pages: GIQR/L 8 (415) • GIQR/L 8-R (415) • GIQR/L 11 (416) • GIQR/L 11-R (416) • GIQR/L 11-15 (417) • GIQR/L 11-15-R (417)
• GIQR/L-A18 (417) • GIQR/L-B18 (418) • GIQR/L-MT (418) • GIQR/L-WT (418)
For holders, see pages: PICCO/MG PCO (Holder) (399) • SBB (120)

414 ISCAR