Page 532 - ISCAR(TURNING-CATALOG-42-2022)

PARTING PENTA 24R/L-J PSIRR CDX RE ±0.04 24
CW
Inserts with 5 Cutting Edges
PSIRL
for Parting Tubes, Small
and Thin-Walled Parts
R.H.

Dimensions L.H. Recommended
Machining Data

IC1008 f groove
Designation CW CDX (1) RE CWTOL (2) PSIRL PSIRR CUTDIA (3) (mm/rev)
PENTA 24L100J15D 1.00 3.50 0.06 0.02 15.0 - 7.0 • 0.02-0.06
PENTA 24R100J15D 1.00 3.50 0.06 0.02 - 15.0 7.0 • 0.02-0.06
PENTA 24L150J06D 1.50 5.00 0.10 0.02 6.0 - 10.0 • 0.03-0.09
PENTA 24L150J15D 1.50 5.00 0.06 0.02 15.0 - 10.0 • 0.03-0.08
PENTA 24R150J06D 1.50 5.00 0.06 0.02 - 6.0 10.0 • 0.03-0.09
PENTA 24R150J15D 1.50 5.00 0.06 0.02 - 15.0 10.0 • 0.03-0.08
PENTA 24L200J06D 2.00 6.00 0.10 0.02 6.0 - 12.0 • 0.04-0.10
PENTA 24L200J15D 2.00 6.00 0.10 0.02 15.0 - 12.0 • 0.04-0.09
PENTA 24R200J06D 2.00 6.00 0.10 0.02 - 6.0 12.0 • 0.04-0.10
PENTA 24R200J15D 2.00 6.00 0.10 0.02 - 15.0 12.0 • 0.04-0.09
• For cutting speed recommendations and user guide, see pages 538-547
(1) Cutting depth maximum
(2) Cutting width tolerance (+/-)
(3) For grooving and parting depths relative to part diameter, see page 533
For tools, see pages: PCAD RE/LE-JHP (499) • PCADR/L (316) • PCADR/L-JHP (317) • PCHBR/L (318) • PCHPR/L (316) • PCHR/L-24 (312)
• PCHR/L-24-JHP (313) • PCHR/L-24-JHP-MC (313)

CW

PENTA 24N-C RE CDX (3) ±0.04 24
Inserts with 5 Cutting Edges for
Parting and Grooving Bars, Hard
Materials and Tough Applications
2
2
Dimensions Recommended
Machining Data

IC908 f groove
Designation CW RE CWTOL (1) RETOL (2) CDX (3) (mm/rev)
PENTA 24N150C010 1.50 0.10 0.02 0.050 5.00 • 0.05-0.11
PENTA 24N157C015 1.57 0.15 0.02 0.050 3.00 • 0.05-0.12
PENTA 24N170C010 1.70 0.10 0.02 0.050 3.00 • 0.05-0.13
PENTA 24N178C018 1.78 0.18 0.02 0.050 3.00 • 0.05-0.14
PENTA 24N196C015 1.96 0.15 0.02 0.050 3.00 • 0.05-0.15
PENTA 24N200C020 2.00 0.20 0.02 0.050 6.00 • 0.05-0.16
PENTA 24N222C015 2.22 0.15 0.02 0.050 3.50 • 0.05-0.16
PENTA 24N230C020 2.30 0.20 0.02 0.050 3.50 • 0.06-0.17
PENTA 24N239C015 2.39 0.15 0.02 0.050 5.00 • 0.07-0.18
PENTA 24N247C020 2.47 0.20 0.02 0.050 5.00 • 0.08-0.18
PENTA 24N270C010 2.70 0.10 0.02 0.050 6.20 • 0.09-0.18
PENTA 24N287C020 2.87 0.20 0.02 0.050 6.20 • 0.10-0.18
PENTA 24N300C020 3.00 0.20 0.02 0.050 6.20 • 0.10-0.20
PENTA 24N300C040 3.00 0.40 0.02 0.050 6.20 • 0.10-0.20
PENTA 24N318C020 3.18 0.20 0.02 0.050 6.20 • 0.10-0.20
PENTA 24N478C055 4.78 0.55 0.02 0.050 6.20 • 0.10-0.25
PENTA 24N486C040 4.86 0.40 0.02 0.050 6.20 • 0.10-0.25
PENTA 24N500C040 5.00 0.40 0.02 0.050 6.20 • 0.10-0.25
• Recessing is possible only with 2.39 mm and wider inserts • For cutting speed recommendations and user guide, see pages 538-547
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) For grooving and parting depths relative to part diameter, see page 532
For tools, see pages: PCAD RE/LE-JHP (499) • PCADR/L (316) • PCADR/L-JHP (317) • PCHBR/L (318) • PCHPR/L (316) • PCHR/L-24 (312)
• PCHR/L-24-JHP (313) • PCHR/L-24-JHP-MC (313)

530 ISCAR